Nakur

Nakur is my personal colocated services, no longer shared with anyone but myself :-) , I use it as a test and development host, as well as hosting for www.evilcoder.org and a few other derived domains ;-) , it has an experimental foundation, by only having the bootsector and /boot on a seperated partition, and the rest in a mirrored ZFS store. ZFS worked fine for me so far on my server at home, so I decided that I could do this (With the help of Robert Blacquiere).

RELEASE:

PLAIN TEXT
CODE:
  1. <br />
  2. FreeBSD nakur.elvandar.org 7.1-STABLE FreeBSD 7.1-STABLE #10 r186820: Tue Jan  6 18:26:56 CET 2009     root@nakur.elvandar.org:/usr/obj/usr/src/sys/NAKUR  amd64
  3. 4<br />

DMESG:

PLAIN TEXT
CODE:
  1. <br />
  2. Copyright (c) 1992-2009 The FreeBSD Project.
  3. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  4.         The Regents of the University of California. All rights reserved.
  5. FreeBSD is a registered trademark of The FreeBSD Foundation.
  6. FreeBSD 7.1-STABLE #10 r186820: Tue Jan  6 18:26:56 CET 2009
  7.     root@nakur.elvandar.org:/usr/obj/usr/src/sys/NAKUR
  8. Timecounter "i8254" frequency 1193182 Hz quality 0
  9. CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2799.98-MHz K8-class CPU)
  10.   Origin = "AuthenticAMD"  Id = 0x40f33  Stepping = 3
  11.   Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  12.   Features2=0x2001<SSE3,CX16>
  13.   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  14.   AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  15.   Cores per package: 2
  16. usable memory = 2103832576 (2006 MB)
  17. avail memory  = 2028859392 (1934 MB)
  18. ACPI APIC Table: <M S I  OEMAPIC>
  19. FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  20.  cpu0 (BSP): APIC ID:  0
  21.  cpu1 (AP): APIC ID:  1
  22. This module (opensolaris) contains code covered by the
  23. Common Development and Distribution License (CDDL)
  24. see http://opensolaris.org/os/licensing/opensolaris_license/
  25. ioapic0 <Version 2.1> irqs 0-23 on motherboard
  26. kbd1 at kbdmux0
  27. acpi0: <M S I OEMRSDT> on motherboard
  28. acpi0: [ITHREAD]
  29. acpi0: Power Button (fixed)
  30. acpi0: reservation of 0, a0000 (3) failed
  31. acpi0: reservation of 100000, 7df00000 (3) failed
  32. Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
  33. acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
  34. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  35. pci0: <ACPI PCI bus> on pcib0
  36. pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
  37. pci1: <ACPI PCI bus> on pcib1
  38. vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xfc000000-0xfdffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
  39. pci1: <multimedia> at device 5.2 (no driver attached)
  40. pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
  41. pci2: <ACPI PCI bus> on pcib2
  42. re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
  43. re0: turning off MSI enable bit.
  44. re0: Chip rev. 0x38000000
  45. re0: MAC rev. 0x00000000
  46. miibus0: <MII bus> on re0
  47. rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
  48. rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
  49. re0: Ethernet address: 00:1d:92:b1:a3:2f
  50. re0: [FILTER]
  51. atapci0: <ATI IXP600 SATA300 controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0
  52. atapci0: [ITHREAD]
  53. atapci0: AHCI Version 01.10 controller with 4 ports detected
  54. ata2: <ATA channel 0> on atapci0
  55. ata2: [ITHREAD]
  56. ata3: <ATA channel 1> on atapci0
  57. ata3: [ITHREAD]
  58. ata4: <ATA channel 2> on atapci0
  59. ata4: [ITHREAD]
  60. ata5: <ATA channel 3> on atapci0
  61. ata5: [ITHREAD]
  62. pci0: <serial bus, USB> at device 19.0 (no driver attached)
  63. pci0: <serial bus, USB> at device 19.1 (no driver attached)
  64. pci0: <serial bus, USB> at device 19.2 (no driver attached)
  65. pci0: <serial bus, USB> at device 19.3 (no driver attached)
  66. pci0: <serial bus, USB> at device 19.4 (no driver attached)
  67. pci0: <serial bus, USB> at device 19.5 (no driver attached)
  68. pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
  69. atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
  70. ata0: <ATA channel 0> on atapci1
  71. ata0: [ITHREAD]
  72. isab0: <PCI-ISA bridge> at device 20.3 on pci0
  73. isa0: <ISA bus> on isab0
  74. pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
  75. pci3: <ACPI PCI bus> on pcib3
  76. acpi_button0: <Power Button> on acpi0
  77. sio0: configured irq 3 not in bitmap of probed irqs 0
  78. sio0: port may not be enabled
  79. sio0: configured irq 3 not in bitmap of probed irqs 0
  80. sio0: port may not be enabled
  81. sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
  82. sio0: type 16550A
  83. sio0: [FILTER]
  84. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
  85. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  86. kbd0 at atkbd0
  87. atkbd0: [GIANT-LOCKED]
  88. atkbd0: [ITHREAD]
  89. cpu0: <ACPI CPU> on acpi0
  90. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  91. acpi_throttle0: CLK_VAL field overlaps THT_EN bit
  92. device_attach: acpi_throttle0 attach returned 6
  93. powernow0: <PowerNow! K8> on cpu0
  94. cpu1: <ACPI CPU> on acpi0
  95. powernow1: <PowerNow! K8> on cpu1
  96. orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
  97. sc0: <System console> at flags 0x100 on isa0
  98. sc0: VGA <16 virtual consoles, flags=0x300>
  99. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  100. WARNING: ZFS is considered to be an experimental feature in FreeBSD.
  101. Timecounters tick every 1.000 msec
  102. ZFS filesystem version 6
  103. ZFS storage pool version 6
  104. ad4: 381554MB <SAMSUNG HD403LJ CT100-12> at ata2-master SATA300
  105. ad6: 381554MB <SAMSUNG HD403LJ CT100-12> at ata3-master SATA300
  106. SMP: AP CPU #1 Launched!
  107. Trying to mount root from zfs:tank/root
  108. tap0: Ethernet address: 00:bd:9a:12:00:00
  109. bridge0: Ethernet address: c6:be:a0:55:71:e4
  110. re0: link state changed to UP